| 詳細內容： |
概述:
隨著科學技術的發展,工業企業中非線性用電設備的種類和數量迅速增加。這些用電設備在運行時會產生大量諧波,從而導致系統損耗增加,嚴整威脅設備的正常運行。因此消除諧波”污染”問題已經成為國際性的重大研究課題 。
TSF動態諧波濾波器根據負荷諧波的大小利用可控硅自動投切諧波濾波器,能夠?qū)崿F(xiàn)對非線性負荷進行動態濾除諧波和動態補償無功功率。該技術填補了國內空白,具有國際先進水平.
主要諧波負荷:
◆變頻器 , 軟啟動裝置
◆電弧爐 , 硅整流裝置
◆電氣化鐵路
◆節能燈 , 家用電器
◆焊機
諧波的危害:
◆降低發電,輸電及用電設備的效率
◆威脅電器設備的正常運行
◆起電網局部的并聯諧振和串聯諧振
◆致無功補償電容器過負荷
◆致繼電保護和自動裝置的誤動作
◆擾通訊系統
◆起數控設備數據丟失及模塊燒毀
TSF動態諧波濾波器的基本原理:
通常諧波電流大小與諧波源設備的工作電流成正比。TSF動態諧波濾波器,由控制器測量出負荷諧波電流,控制雙向可控硅過零觸發,在投切過程中無沖擊,無涌流,無過渡過程。在動態濾波的同時也動態補償無功功率。
另外,TSF+TSC可以組成動態諧波,無功功率綜合補償器,適合于負荷諧波含量大,功率因數低,負荷波動大的場合,可有效的實現動態諧波抑制和無功補償,是諧波抑制和無功補償領域的重要創新。
技術參數:
◆額定電壓 :380V
◆額定頻率 :50(60)HZ
◆基本濾波器 :3th,5th ， 7th,11th
◆防護等級 :IP30
訂貨須知:
◆提供必要原始數據（或?qū)崪y值）和所需無功補償容量
◆柜體型號顏色
◆其他特殊要求
TSF Dynamic Harmonic Filters
INTRODUCTION：
With the development of science and technology, the variety and quality of non-linear electric facilities in industrial enterprises are increasing rapidly. These facilities produces large amount of harmonic at working, which increases the system loss and damage of the system. So how to eliminate this harmonic pollution has become an important international subject.
TSF-dynamic harmonic filters adopt the SCR auto-switch harmonic filters cooperating with the harmonic load, filtrate dynamic harmonic waveform and compensate dynamically the reactive power. This technique fills the national gap, has internationally advanced level.。
MAIN HAMONIC SOURCES：
◆Frequency converter, soft switch device
◆Arc stove, SCR rectification device
◆Electrified railway
◆Economic light, housekeeping appliance
◆Welding machine
HARMONIC HARM：
◆Reduce power generating, transmitting, and efficiency of the equipments
◆Threat the electrification equipment regular working
◆Cause local series and parallel resonance at the power grids
◆Cause the reactive compensating capacitor over-load
◆Cause the relay safeguard and automatic equipment error
◆Disturb the communicating system
◆Cause data loss and model burning down in the data controlling equipments
BASIC THEORY OF TSF DYNAMIC HARMONIC FILTERS：
Usually the harmonic current is proportional to the working current of the harmonic sources. TSF-dynamic harmonic filter measures the load harmonic currents through the controller and makes the bi-directional triode thyristor trigger at zero without shock, fluctuating current, and transitional process in the actuation process.
Additionally, TSF+TSC can consist into dynamic harmonic, reactive power multi-compensator, suitable to high-harmonic loads, low power factor and high fluctuating loads. It can effectively eliminate the dynamic harmonic and compensate the reactive power. TSF+TSC is an important innovation in the field of harmonic eliminating and reactive power compensating.
TECHNIQUE PARAMETERS：
◆Rated voltage: 380V
◆Rated frequency: 50(60)HZ
◆Basic filter: 3th,5th,7th,11th
◆Protective level: IP30
ORDERING NOTICE：
◆Provide essential original data (or data measured) and the reactive power capability needed
◆The type and color of the cupboard
◆Other specific demands
Notice: If needing various harmonic times, voltage level and capacity filter, can inquire to our tech-employees directly.
|
|
中國電子商務服務聯盟成員單位 瓊ICP備